Here’s an overview of the Best Paver Sealers that we’ll explore today:
Paver sealers play a critical role in protecting outdoor hardscapes from moisture intrusion, deicing salts, staining, and UV-induced degradation, while also influencing aesthetics through color enhancement or satin/wet-look finishes. The products reviewed here cover a range of chemistries (silane/siloxane penetrants, acrylic sealers, and water-based formulations) and finishes (natural, satin, and wet-look). To assess them, I evaluated: 1) penetration and breathability (for penetrating sealers), 2) gloss level and color enhancement (for acrylic and wet-look sealers), 3) UV stability and stain resistance, 4) ease of application and dry times, 5) coverage per gallon under typical porosity, and 6) durability indicators such as resistance to deicing salts and wear over time. The comparison includes BEEST CS-9500, OAIEGSD 128oz Wet Look, BEEST PS-8700 Satin, DOMINATOR LG+ Clear, and Serveon Natural Stone Sealer (Wet Look Matte). These options range from penetrating silanes to high-gloss and matte finishes, catering to contractors and DIYers alike.
1. Concrete Sealer – 9500 Ready to Use
- Brand: BEEST
- Manufacturer: BEEST
Overview: BEEST CS-9500 is a contractor-grade penetrating silane/siloxane sealer designed to repel moisture while preserving the surface’s natural appearance. It emphasizes deep penetration through a high-active formulation, UV stability, and a breathable, non-film forming finish. The DOT-approved credentials highlight compatibility with deicing-salt exposure and freeze-thaw environments. The product claims coverage of 125–200 sq ft per gallon with two coats and a long lifespan (up to 5 years ground; up to 10 years vertical when applied properly). Prospective buyers should expect a natural look with minimal surface film buildup and enhanced subsoil protection.
Performance-wise, CS-9500 excels as a preventative barrier against moisture ingress, reducing cracking and spalling caused by freeze-thaw cycles and chlorides. Its low-VOC, breathable formula helps maintain material porosity, which is important for stone, brick, and masonry substrates that rely on vapor diffusion. Application is straightforward for professionals and capable DIYers, with the caveat that actual coverage depends on porosity; higher porosity surfaces will see deeper penetration but may require reapplication sooner. The DOT claim suggests strong performance in road-resurfacing or commercial environments where de-icing salts are common. User experience benefits from a clear, natural finish that does not seal the surface into a glossy film, preserving the original look.
Pros
- Deep penetrating silane/siloxane formula for durable moisture protection
- DOT-approved, suitable for freeze-thaw and chloride exposure
- Natural, non-film forming finish with breathable properties
- Long potential lifespan with proper application
Cons
- Coverage range (125–200 sq ft per gallon) can vary with porosity
- No explicit gloss or color-enhancement; limited aesthetic change
- Price not disclosed in the listing
2. 128oz Wet Look Color Enhancer Sealer with Gloves
- Brand: OAIEGSD
- Manufacturer: OAIEGSD
Overview: OAIEGSD presents a 128 oz wet-look color enhancer sealer designed to impart a glossy, color-enhanced appearance while delivering water resistance. It targets pavers, bricks, stone, and concrete with a fast-drying, non-toxic formulation. The product emphasizes a high-gloss finish and color enhancement, making it suitable for outdoor patios and driveways where aesthetics are a priority. Coverage is listed as 130–250 sq ft per quart, which translates to roughly 520–1000 sq ft per gallon, depending on porosity and number of coats.
In practice, this sealer is best applied over visually porous, darker substrates to achieve a dramatic wet look. The gloss level will intensify with multiple coats, and color depth can vary with substrate color and texture. It provides durable outdoor protection against water penetration and staining, but being a color-enhancing acrylic, it may require maintenance sooner than penetrating sealers, particularly on areas exposed to heavy foot or vehicle traffic. The user experience benefits from a straightforward application, gloves included, and a quick-dry profile that minimizes downtime.
Pros
- High-gloss wet-look finish that enhances color
- Suitable for a wide range of substrates (pavers, brick, stone, cement)
- Non-toxic, quick-drying formula
- Includes gloves for safe application
Cons
- Acrylic-based, thus less breathable and potentially more surface wear over time
- Gloss can become slippery if over-applied or on wet surfaces
- Not a penetrating sealer; offers surface protection with less breathability
3. Paver Sealer – 8700 Wet Look (Satin Finish) – 1 Gallon Covers up to 175-250 sq ft (2 Coats)| Concrete Sealer Outdoor – Color Enhancing Acrylic Sealant for Stones
- Brand: BEEST
- Manufacturer: BEEST
Overview: BEEST PS-8700 is a water-based acrylic sealer designed to deliver a satin finish with color enhancement. It targets multiple substrates including pavers, stone, stamped concrete, and brick. The product claims 175–250 sq ft per gallon with two coats and emphasizes UV stability, resistance to oil and water absorption, and a non-yellowing formula. The satin finish provides a balanced appearance that enhances color without an overly glossy look.
Performance-wise, PS-8700 is positioned as a versatile outdoor sealer that defends against staining and abrasion while preserving the natural pattern of the underlying material. Being acrylic and water-based, it tends to dry relatively quickly, with the potential caveat that porous surfaces may require additional coats to achieve the desired color depth. The finish is described as UV-stable and non-yellowing, which helps maintain color integrity on sun-exposed surfaces for several years if maintained properly.
Pros
- Color-enhancing satin finish with UV stability
- Versatile for various substrates (pavers, concrete, brick, stone)
- Non-yellowing, water-based with low odor
- Good protection against oil and water absorption
Cons
- Requires multiple coats for deeper color on porous surfaces
- Acrylic finish may wear in high-traffic areas faster than penetrating sealers
- No DOT-specific or salt-erosion claims
4. DOMINATOR LG+ Clear Acrylic Sealer 2.5 Gal | Low Gloss Paver Sealer | Wet Look
- Brand: DOMINATOR
- Manufacturer: DOMINATOR
Overview: DOMINATOR LG+ is a 2.5-gallon, water-based acrylic sealer designed for pavers and decorative concrete, offering a low-gloss to wet-look appearance with optional color enhancement. It emphasizes fast dry times and a user-friendly spray application, targeting driveways and patios where efficiency is valued. The product coverage is listed at 250–400 sq ft per gallon per coat, which translates into substantial area coverage with fewer coats.
Performance-wise, LG+ aims to balance protection with aesthetics, providing resistance to oil stains and weathering while avoiding strong odors due to low VOC content. The spray-friendly formulation and quick-dry cycle support one-day projects, making it appealing for contractors and DIYers who want minimal downtime. However, being an acrylic sealer, it forms a protective film on the surface rather than penetrating deeply, which means maintenance might be more frequent in porous or heavily used areas, and there is potential for glossy buildup if over-applied.
Pros
- High coverage per gallon with 250–400 sq ft per coat
- Fast dry time enables one-day projects
- Low VOC, spray-friendly application
- Clear finish with option for color enhancement
Cons
- Film-forming acrylic may require maintenance over time
- Not a penetrating sealer; limited deep protection for highly porous substrates
- Explicit limitations for stone or clay per product sheet
5. Natural Stone Sealer (Wet Look Matte Finish) Commercial Grade Outdoor Indoor Waterproof Grout Sealer Protects Pavers Pools Patios Decorative Landscape Stones (1 Gallon) H2800S
- Brand: Serveon Sealants
- Manufacturer: Serveon Sealants
Overview: Serveon Sealants H2800S is a penetrating, water-based stone and grout sealer designed to provide a natural, wet-look matte finish while safeguarding against moisture and saltwater erosion. The product emphasizes deep penetration, UV resistance, and a ready-to-use formula with no mixing. It targets indoor and outdoor stone surfaces such as travertine, flagstone, limestone, and pavers, with coverage estimates of 200–450 sq ft per gallon depending on porosity and surface texture.
In practice, H2800S offers a breathable, non-film-forming approach similar to other penetrating sealers, preserving texture and color without a shiny surface. Its wet-look matte finish aims to enhance color depth subtly while maintaining a natural stone appearance. The deep penetration strengthens the surface against salt erosion and freeze-thaw damage, making it suitable for outdoor pools and patios as well as indoor stone applications. Application is straightforward with typical brush or roller methods, and the ready-to-use format reduces mix ratios for DIY users.
Pros
- Penetrating sealer with deep pore saturation
- Wet-look matte finish preserves natural stone appearance
- UV resistant and saltwater erosion protection
- Ready-to-use, no mixing required
Cons
- Not explicitly DOT-approved or salt-specific labeling
- Coverage varies widely with porosity (200–450 sq ft per gallon)
- Limited information on long-term durability compared to DOT-rated products
Frequently Asked Questions
We’ve compiled answers to the most common questions about paver sealerss to help you make an informed decision.
Conclusion
.
.
Final thoughts here.